Shopping Cart
0
Your Shopping Cart Is Empty.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' In Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
$ 139
$
0.00
$ 19.99
$
0.00
$ 59.99
$
0.00
$ 109
$
0.00
$ 22.99
$
0.00
$ 132.99
$
0.00
$ 7.99
$
0.00
$ 12.99
$
0.00
$ 89
$
0.00
$ 139
$
0.00
$ 24.99
$
0.00
$ 22.99
$
0.00
$ 99
$
0.00
$ 12.99
$
0.00
$ 129
$
0.00
$ 29.99
$
0.00
1. GT100+ adds Electronic Current Display.
On bench connect the ECU module by using the banana connector or db25 dedicated ECU adapter, Godiag GT100+ will display the electronic current.
The advantage to display electronic current value:
The user can intuitively see the current status of the ECU. There is no current display or the actual displayed current is inconsistent with the engineer’s expected current, then you can immediately check whether the wiring is wrong, if the wiring is correct, he can judge that the ECU may be broken, so there is no need to perform diagnostic communication and can directly repair the ECU.
If it shows too much current, then you can also determine if the cable is incorrectly connected or the ECU is broken.
2. GT100+ Adds CANBUS Protocol Communication
GT100+ Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol. GT100 can only display K-Line Pwm Vpw+ KWP 2000 protocol. GT100+ will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.
3. Reset instrument/immobilizer when all keys lost
When you want to program key for VW, Porsche, Mitsubishi and nother cars with all keys lost, or to program Toyota ECU, you need to activate the dashboard (reset instrument) or wake up the immobilizer module first. Then you can operate directly by using GT100 GT100+.
a. To replace the engine ECU of Toyota or to use some key programmer to program Toyota when all keys lost, it requires to short-circuit PIN13-PIN4
b. To program Mitsubishi key with all keys lost or to set OBDII when all remote keys lost, please short-circuit PIN1-PIN4.
c. For Porsche and VAG 4th generation / 5th generation keys (for example new A6L Touareg A4 Q5 A7), please use GT100+ to short-circuit banana connector PIN 16—-PIN 1 to lit up the dashboard, after that use the key programming tool to connect with the female adapter of GT100+ for data collection. Some vehicle dashboards won’t be lit up, but data can also be collected, for example: A6L Q7.
Package includes:
1pc x Host
1pc x OBD 2-in-1 extension cable
1pc x Colored jumper cable
1pc x Power supply 12V
1pc x Resistance 120 ohm
6pcs x Banana plug
24pcs x Wire accessories, Dupont 2.54mm connector female pins
Contact information:
Whatsapp: +86 18664982862
Email : info@obdfamily.com
Skype : kellie-obding
Shipping Methods :
DHL Shipping : 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. If address belongs to remote area, customer will need to pay remote handling cost or we can change to ship by EMS. Please remeber to leave message if you have any special requirement.
Yanwen Express : 7-10 working days. No Tax or remote cost for European Countries.
Standard Post : 10-15 days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
{{item.displayed_price.unit_prefix}} {{item.displayed_price.min}}
{{item.displayed_price.unit_prefix}}
{{item.displayed_price.original_min}}
United States
Carrier
CostDelivery TimeTracking
Company
CostTime
{{ shipitem.name }}
Free Shipping To Be Negotiated {{detail_data.currency.unit_prefix}} {{shipitem.price}} {{shipitem.datemin}}-{{shipitem.datemax}} days Available
{{reply_items.text}}By {{reply_items.author}}